X3i

PRODUCT SUPPORT

X3i

30W portable speaker — IP67 dustproof and waterproof, up to 15h battery, Bass Boost, a built-in powerbank, AUX input and Duo Mode for a second X3i. Setup, playback modes, troubleshooting, specs, spares and FAQs below.

Ask Anton

Questions about your X3i?

Anton is the BlueAnt AI assistant. Ask anything about your X3i: setup, pairing, battery, warranty, spare parts. Anton answers in seconds.

If Anton can’t sort it, your message goes to the team.

Setup & Getting Started

Getting started with your X3i

Before using your BlueAnt X3i for the first time, fully charge the speaker.

  • Connect the X3i to power using either the supplied AC charger (with charging pins) or the USB charging cable

  • Allow the speaker to charge until the battery indicator lights show it is fully charged

  • A full charge typically takes around 3 hours using the supplied AC charger


Powering on the speaker

  • Press the Power button to turn the speaker on

  • The X3i will announce “Bluetooth”, and the Bluetooth indicator will flash, showing it is ready to pair

  • If the speaker is not paired to a device, it will enter pairing mode automatically

  • Each time the speaker powers on, the volume resets to approximately 25%


Bluetooth pairing

To pair the X3i with your phone, tablet, or other Bluetooth device:

  1. Make sure Bluetooth is enabled on your device

  2. Select “BlueAnt X3i” from the list of available Bluetooth devices

  3. Once connected, the speaker will announce “Connected”

The X3i will automatically reconnect to the last paired device when powered on, if it is in range.


Calls using the built-in microphone

  • The X3i includes a built-in microphone for hands-free calls

  • When connected via Bluetooth, calls will play through the speaker

  • Speak normally toward the front of the speaker during calls

  • If no device is connected, the X3i will automatically power off after about 10 minutes to conserve battery

If you’re having trouble setting up or connecting your X3i, let me know what’s happening and I’ll guide you through the next steps.

Battery & Charging

Charging the X3i

The BlueAnt X3i can be charged using either:

  • The supplied AC charger body and charging pins

  • The supplied USB charging cable connected to a USB power source

For faster charging and high-volume use, the supplied AC charger is recommended.

A full charge typically takes around 3 hours using the AC charger. Charging via a computer USB port may take longer.

While charging:

  • The battery indicator lights will flash to show charging is in progress

  • The lights will remain solid once charging is complete

  • All four battery indicator lights showing means the battery is fully charged


Battery life

The X3i provides over 15 hours of play time at 50% volume.

Battery life will vary depending on:

  • Volume level

  • Use of Bass Boost

  • Type of audio content

  • Environmental conditions

  • The X3i has a 3.7 V, 9600 mAh internal battery

At very high volume levels (near maximum), play time may be reduced to approximately 4–5 hours.


Charging notes

  • The speaker can be used while charging

  • For extended use at maximum volume, keep the X3i connected to the AC charger

  • Ensure the port cover is fully closed before outdoor or wet-weather use

If you’re experiencing issues with charging or battery performance, let me know what’s happening and I’ll guide you through the next steps.

Playback Modes & Inputs

Bluetooth playback

The BlueAnt X3i supports wireless audio playback via Bluetooth.

Once paired, audio from your connected device will play through the speaker.

Playback behaviour and audio quality depend on the source device, distance, and surrounding wireless interference.

Bluetooth playback is suitable for phones, tablets, laptops, and other compatible devices.


AUX playback

The X3i also supports AUX (3.5mm) audio input for wired playback.

When an AUX cable is connected:

  • The speaker will automatically switch to AUX mode

  • Audio will play from the connected device

  • Track control must be managed on the source device

When the AUX cable is removed, the X3i will automatically return to Bluetooth mode.

When an AUX cable is connected, Bluetooth audio will stop automatically. This is expected behaviour and not a fault.

The AUX cable is not included.

If your audio isn’t playing or something isn’t working as expected, let me know what’s happening and I’ll guide you through the next steps.

Calls & Microphone

Bluetooth connection

The BlueAnt X3i uses Bluetooth to connect wirelessly to phones, tablets, laptops, and other compatible devices.

Once paired, the X3i will automatically reconnect to the last connected device when powered on, provided the device is in range and Bluetooth is enabled.

Bluetooth performance may vary depending on the connected device, distance, and surrounding wireless interference.

To disconnect the currently paired device and allow a new device to connect, press and hold the Play button for about 8 seconds until the speaker announces “Disconnected”.


Phone calls

The X3i includes a built-in microphone, allowing it to be used for basic handsfree phone calls.

During a call:

  • Call audio plays through the speaker

  • Your voice is captured by the speaker’s built-in microphone

  • Press the Play/Pause button once to answer an incoming call

  • Press the Play/Pause button again to end the call

  • Double press the Play/Pause button to reject an incoming call

Call quality depends on factors such as distance from the speaker, surrounding noise, and the connected device.


Voice assistants

When paired with a compatible phone, the X3i can be used with Siri or Google Assistant via the connected device.

Voice assistant availability and behaviour depend on your phone’s settings.

To activate or cancel Siri or Google Assistant, double click the Play/Pause button on the speaker.

If you're experiencing connection or call issues, let me know what’s happening and I’ll guide you through the next steps.

Reset & Troubleshooting

Resetting the X3i (Bluetooth Recovery)

If your X3i is not connecting, pairing correctly, or behaving as expected, a reset can help restore normal operation.


How to reset the X3i:

  1. Make sure the speaker is powered on

  2. Press and hold the Power button for approximately 12 seconds

  3. Release the button when the speaker powers off

  4. Power the speaker back on - it will re-enter Bluetooth pairing mode

Resetting clears stored Bluetooth connections and restarts the speaker.


When to try a reset

You may wish to reset the X3i if:

  • The X3i won’t connect to Bluetooth

  • Audio is cutting in and out on the X3i

  • The X3i doesn’t appear in the Bluetooth device list

  • Duo Mode isn’t working as expected (a reset clears stored Bluetooth connections but does not clear Duo Mode pairing. To clear and re-pair Duo Mode, see X3i – Duo Mode (Two Speakers))

If issues continue after resetting, try pairing the speaker with a different device to help isolate the issue.

If the X3i is already paired to another nearby device, press and hold the Play/Pause button for about 8 seconds until the speaker announces “Disconnected”, then pair it again.

If the speaker appears to turn itself off, check that it is not simply powering off after about 10 minutes with no device connected. This is normal battery-saving behaviour, not a fault.


When troubleshooting does not resolve the issue

  • If your X3i remains unresponsive or the issue continues after completing all reset and troubleshooting steps, this may indicate a hardware fault

  • BlueAnt will guide you through the next warranty assessment steps for further review

Technical Specifications

The BlueAnt X3i has the following specifications:

  • Speaker output: 30 W (15W x 2 RMS)

  • Bluetooth version: 5.0

  • Bluetooth profiles: A2DP, HSP, HFP

  • Water resistance: IP67 (dustproof and waterproof)

  • Battery life: Over 15 hours at 50% volume (usage dependent)

  • Charging method: USB-C charging cable with AC charger body and charging pins

  • Playback modes: Bluetooth, AUX (3.5mm)

  • Duo Mode: Supported (X3i ↔ X3i)

  • Powerbank: Yes (USB output 5V/1A)

  • Built-in microphone: Yes

  • Sound features: Bass Boost button

  • Drivers: 2 x 57mm drivers and 2 passive radiators

  • Dimensions: 23 cm (W) × 10 cm (D) × 11.5 cm (H)

  • Weight: approximately 1.1 kg

  • Battery: 3.7 V, 9600 mAh

  • Frequency response: 150 Hz to 20 kHz

  • Power input: DC 5 V, 3 A

  • Power consumption: 15 W (standby under 5 mW)

  • Operating temperature: 5°C to 40°C

  • Colour: Slate Black

Specifications are subject to change without notice.

Spare Parts & Accessories

A limited range of spare parts for the BlueAnt X3i speaker are available to purchase directly from the BlueAnt website, subject to availability.


Available to purchase online

The following spare part is currently available:

  • X3i AC charger and USB-C cable

You can view and purchase available X3i spare parts here:

https://blueant.com.au/collections/x3i-spare-parts


Compatibility notes

  • The X3i uses a specific AC charger and USB-C cable

  • The X3i charger is listed as “X3i AC charger & USB C cable”. The similarly named “X3 AC charger & USB C cable” is a different part for the original X3 speaker and should not be supplied for an X3i

  • Using the supplied or compatible chargers is recommended for best performance

  • Using incompatible chargers may result in slow charging or charging issues


Other spare parts

If the spare part you’re looking for isn’t listed on the website, it may no longer be available or may require a manual enquiry.

To check availability, please contact us and include:

  • The part you’re looking for

We’ll confirm availability and provide pricing if applicable.


Important notes

  • Spare parts purchased separately are not treated as warranty replacements. If your product has a fault, let me know what’s happening and I can help guide you through the next steps.

  • Availability and pricing may vary by region

  • Spare parts are subject to stock availability

FAQs

What comes in the box?

  • X3i speaker
  • USB-C charging cable
  • AC charger body
  • Charging pins
  • Product manual

That is the full list. An AUX cable is not included — if you want to connect by cable rather than Bluetooth, you will need your own 3.5mm cable.


How long does the battery last, and how long does it take to charge?

Over 15 hours at 50% volume. Flat out at 100% it is 4–5 hours. The type of music, how much bass you are pushing and the conditions all move that figure.

A full charge takes around 3 hours using the supplied USB-C cable and AC charger, into the port at the rear. Four lights means fully charged. For a long session at full volume, leave it on the AC charger and keep playing.


The volume is low every time I turn it on. Is something wrong?

No — that is by design. The X3i resets to 25% volume every time it powers on. Turn it back up and it will behave normally.


It switched itself off while I was not using it.

Normal, not a fault. After 10 minutes with nothing connected, the X3i powers off to conserve battery.


Bass Boost is off again after I turn the speaker on. Did it not save?

It does not save. The X3i resets to Standard EQ every time it powers on, so Bass Boost has to be switched back on.

Short press the Bass Boost button to move from Standard EQ to Bass Boost, and press again to go back. It suits music with strong low-frequency content, and outdoor or larger spaces. It does draw more battery, and at very high volume it will shorten your play time.


Can I take it in the pool?

It will survive going in, but it is not built to swim with. IP67 means dust-tight and protected against immersion up to 1 metre for up to 30 minutes. Poolside, beach, backyard and wet weather are all well within that.

Two conditions, and both are mandatory: the port cover must be fully closed, and no cables can be connected.

Keep it away from showers, hot water, steam and continuous running water — the rating does not cover those. Same for water deeper or longer than rated, and for temperatures outside 5°C to 40°C.

If it has been in the water, let it dry completely before charging. Charging while wet, or leaving the port cover open in wet conditions, is what causes damage.


How do I charge my phone from it?

Open the port cover on the back and use the USB port marked 5V OUT — that is the powerbank, rated 5V 1A. Plug your phone in with its own USB cable and charging starts automatically.

The speaker does not need to be powered on for this. Expect it to be slower than a wall charger, and expect it to reduce your play time.


The powerbank stopped charging my phone. Is the port broken?

Almost certainly not. When the X3i’s own battery gets very low, the powerbank output turns off automatically to conserve power. Charge the speaker and the output works again.


How do I pair two X3i speakers?

  1. Power on the first speaker
  2. Press and hold Volume + and Volume − together until it announces “Duo Mode pairing”, then release
  3. Power on the second speaker
  4. Hold Volume + and Volume − together on that one until it announces “Duo Mode pairing”
  5. Wait for “Duo Mode connected” — this can take up to a minute

The speaker that announces the connection is the master — pair your phone to that one. Duo Mode runs over Bluetooth only, and an X3i pairs only with another X3i. In direct line of sight you should get about 30 metres between the two speakers; indoors, walls and obstacles will cut that down.


I turned one speaker off in Duo Mode and both shut down.

That is expected. Powering off one speaker powers off both. They also have to be turned on individually — once they are, Duo Mode reconnects on its own.

Volume is synchronised across the pair, and calls come through the master speaker only.

To separate them, hold Volume + and Volume − until you hear “Duo Mode disconnected”, and release the moment you hear it. Keep holding for about 8 seconds and it clears the pairing instead — the speaker announces “Duo Mode cleared”.


It keeps connecting to the wrong phone.

A device that is already paired and nearby has taken it. To hand it over, press and hold Play/Pause for 8 seconds until the speaker says “disconnected”. Other devices can then find and pair with it — look for BlueAnt X3i in your Bluetooth menu.


Can I use it with my TV or laptop?

Yes, over Bluetooth or a 3.5mm AUX cable. Most laptops and some smart TVs support Bluetooth audio out, though how well it behaves varies between manufacturers and operating systems.

There is no HDMI, optical or other digital audio input. Over Bluetooth, expect some audio delay on video — lip sync depends on the TV or laptop, not the speaker — so if your TV has a 3.5mm output, a cable will reduce or remove the delay and hold a steadier connection. You may need to set the volume on both the source and the speaker.

Plugging an AUX cable in switches the X3i to AUX mode automatically, and unplugging it returns to Bluetooth. In AUX mode, change and control tracks on the source device rather than on the speaker.


Can I play music from a USB stick or an SD card?

No. The X3i has no media playback from USB or SD. Behind the port cover there is a USB-C port for charging the speaker, the 5V OUT USB port which is a powerbank output only, and the 3.5mm AUX in. Music comes from Bluetooth or AUX.


How do I answer a call and skip tracks?

The X3i has a built-in microphone, so calls are hands-free.

  • Answer or end a call — press Play/Pause
  • Reject a call — double click Play/Pause, or press and hold
  • Play or pause — press Play/Pause
  • Skip forward — press and hold Volume + for 1.5 seconds
  • Skip back — press and hold Volume − for 1.5 seconds
  • Siri or Google — double click Play/Pause

It is sold as 30W but the label says 15W. Which is right?

Both. 30W is the total maximum output; 15W × 2 is the continuous RMS rating, which is always the lower number. The X3i drives two 57mm drivers and two passive radiators.


Didn’t find what you need?