Your cart is currently empty.

SHOP NOW

faq's

Please select your product


Pump Air ANC2
FAQ

Pump Air ANC2

How do I pair my Pump Air ANC2?

  • Place the Pump Air ANC2 into the charging case to turn it off.
  • Take the Pump Air ANC2 out of the charging case and it will power on and the ear buds will say “Bluetooth pairing”.
  • On your phone, go to settings > Bluetooth® > enable Bluetooth® > scan/search/add new devices > select BlueAnt Pump Air ANC2.

You should now be paired.

How to reconnect the left and right Pump Air ANC2 ear buds?

In order to reconnect the Pump Air ANC2 we need to reset it and pair the left and right togetherThis method is used if you replace a lost ear bud.

Please turn off Bluetooth on your phone before starting this process.

  • Place both ear buds in the charging case.
  • Open the charging case lid then press and hold the MFB on each ear buds for 10 seconds, until the LEDs flash 4 times, then let go of the button.
  • Remove both ear buds from the charging case and place within 10cms of each other and wait about 10 seconds.
  • The ear buds will connect to each other then one bud will flash red/green to signify they are in pairing mode.
  • Re-enable Bluetooth on your phone.
  • You can now search for and pair to the BlueAnt Pump Air ANC2.

What is the play time of the Pump Air ANC2?

  • The Pump Air ANC2 ear buds will last for approximately 6 hrs.
  • The charging case has another 24 hours of play time.
  • The actual time will vary dependent on the volume, type of music and environmental factors.

Does the Pump Air ANC2 support Multipoint?

  • Yes, you can connect to two devices simultaneously.

How many microphones does the Pump Air ANC2 have?

  • The Pump Air ANC2 has 4 microphones.

What fitting options does the Pump Air ANC2 have?

  • The Pump Air ANC2 has 3 sizes of Comfortseal tips

How do I control ANC and Transparency on my Pump Air ANC2?

  • To change between Active Noise Cancelling and Transparency simply tap the left ear bud.
  • Each time you tap the left ear bud it will cycle to the next option.ANC and then Transparency.
  • ANC is on by default when the Pump Air ANC2 powers on, with approximately 22dB of Noise Cancellation.

How do I control music on the Pump Air ANC2?

  • To play music simply tap the right ear bud, to pause simply tap the right ear bud again
  • To skip forward to the next track, double tap the right ear bud
  • To skip back to the previous track, double tap the left ear bud

How do I control calls on the Pump Air ANC2?

  • To answer a call simply tap either ear bud
  • To end the call simply double tap either ear bud
  • To reject a call press and hold either ear bud

How do I control volume on the Pump Air ANC2?

  • To increase the volume when music is playing or on a call press and hold the right ear bud. Volume can only be changed when on a call or music is playing.
  • To decrease the volume when music is playing or on a call press and hold the left ear bud. Volume can only be changed when on a call or music is playing.

How do I use Siri/Google with my Pump Air ANC2?

  • To use Siri/Google simply triple tap either ear bud.
  • To cancel Siri/Google simply triple tap either ear bud again.

How do I power off the Pump Air ANC2 without the charging case?

  • To power off the Pump Air ANC2 without the charging case firstly please pause any music that is playing, then press and hold the button on either ear bud for about 6 seconds. the Pump Air ANC2 will say "powering down" and both ear buds will turn off.

How do I power on the Pump Air ANC2 without the charging case?

  • To power on the Pump Air ANC2 without the charging case press and hold the button on each ear bud for about 2 seconds. Both ear buds turn on independently.

How do I pair the Pump Air ANC2 to a new phone?

  • To pair the Pump Air ANC2 please follow these steps.
  • Turn off Bluetooth on the first phone.
  • The Pump Air ANC2 should go into pairing mode.
  • Search for and select the BlueAnt Pump Air ANC2 on the second phone .

How can I get the best, possible Bluetooth® connection with my Pump Air ANC2?

If your phone is in your pocket and you experience any connectivity issues please try changing to another pocket, preferably front right, or changing the position of your phone as the antenna in the phone may be at the other end, top or bottom, depending on phone model.

If your phone has a case on it, this could also be blocking the Bluetooth® signal, so see if removing the case solves the issue.

If problems persist please contact us at care@blueantwireless.com.

My ear buds are connecting whilst in the charging case – why is this?

When the charging case runs out of charge the Pump Air ANC2 turns on and tries to connect to your phone. Please plug in the charging case to stop this occurring. A full charge only takes one hour. If you can’t charge your charging case at this time, please press and hold the button on each ear bud until they say “powering down”.

How do I pair to my smart watch?

Please place your Pump Air ANC2 into the charging case and turn off Bluetooth® on your phone. Then go through the Bluetooth® pairing steps on your smart watch to search for a device to add. Please remove the Pump Air ANC2 from the charging case and they will say “Bluetooth Pairing”. Now select the Pump Air ANC2 on your smart watch.

What are the Pump Air ANC2 ear tips made from and do they contain any latex?

The Pump Air ANC2 ear tips are made from silicon and do not contain any latex.

Can I buy replacement spare part?

Yes you can, we sell left and right earbuds and charging cases separately.

Can I use one earbud to make calls and hear music?

Yes, please use either ear bud for Mono use.

Are the Pump Air ANC2 compatible with my phone?

The Pump Air ANC2 should be compatible with most Bluetooth® enabled phones. The phone needs to support A2DP in order for music playback to work and Handsfree and/or Headset profile in order for calls to work. Generally, all Bluetooth® devices should be able to connect to most modern phones. Any Bluetooth® version over 1.2 should be backwards compatible.

Why is my charger case not receiving power?

Please plug the charging case into a 5V 1A power supply using the supplied USB-C cable. If this does not charge your charging case please try another charging cable or another power supply to determine if there is a fault with the cable or power supply.

If you can replicate the same fault using a different USB-C cable and power supply, then please send us an email to care@blueantwireless.com and we will assist further.

Can I use my Pump Air ANC2 with my computer, laptop or tablet?

To use the Pump Air ANC2 via Bluetooth with your computer/laptop/tablet your device must support A2DP for music playback.

To use the microphone on the Pump Air ANC2 your computer/laptop/tablet must support HFP or HSP.

To check what is supported on your computer please check with your computer/laptop/tablet manufacturer.

To connect to your Computer/Laptop/Tablet:

  • Please disable Bluetooth on your phone.
  • Then take either ear bud out of the charging case.
  • The ear bud will say "Bluetooth pairing".
  • Then on the computer/laptop/tablet add a Bluetooth device and select the Pump Air ANC2.
  • Once the Pump Air ANC2 is connected you can take the other ear bud out of the charging case and it will connect to the first ear bud.
  • You can now re-enable Bluetooth on your phone.
  • To switch back to phone use please disable Bluetooth on your computer/laptop/tablet and select the Pump Air ANC2 on your phone.
  • Once the Pump Air ANC2 is connected to your phone you can re-enable Bluetooth on your computer/laptop/tablet.