Your cart is currently empty.

SHOP NOW

Subscribe Now & receive 20% OFF your first purchase

faq's

Please select your product


X0i
FAQ

X0i

How do I power on the X0i?

Turn the X0i on by pressing the power button for 1.5 seconds, the X0i will announce “pair me” and the light on the side will flash to signal the X0i is in pairing mode, the first time it is powered on.

On your phone or source device search for and select the BlueAnt X0i.

How do I pair the X0i?

Turn the X0i on by pressing the power button for 1.5 seconds, the X0i will announce “pair me” and the light on the side will flash to signal the X0i is in pairing mode.

If this does not occur please press and hold the Bluetooth button for 1.5 seconds and the X0i will announce "pair me".

On your phone or source device search for and select the BlueAnt X0i.

How long is the play time on the X0i?

The play time depends on the volume, type of music and distance from the source device but you should be able to get up to 13 hrs of play time at 50% volume.

How long does it take to charge the X0i?

The X0i takes about 3 hrs to charge using an AC charger, it may take longer when using a computer’s USB port. The light on the side will glow orange when charging and green when fully charged..

What type of charging port does the X0i have?

The X0i has a USB C charging port.

How do I change the volume on the X0i?

  • Click the plus button to turn up the volume.
  • Click the minus button to turn down the volume.
  • Every time you turn on the X0i the volume defaults back to 50%.

How do I skip tracks on the X0i?

  • Press and hold the plus button for about 1.5 seconds to skip forward a track.
  • Press and hold the minus button for about 1.5 seconds to skip backward a track.

Does the X0i have a microphone?

Yes, the X0i has a built-in microphone so you can take calls or use it with Siri/Google.

Simply double click play to activate or cancel Siri/Google.
To deactivate Siri/Google simply double click the play button again.

How do I answer and end or reject calls on the X0i?

  • Press the play button to answer a call.
  • Press the play button when on a call to end the call.
  • To reject a call either double click the play button or press and hold the play button for about 2 seconds when you have an incoming call.

How do I use Siri or Google with my X0i?

Once your X0i is paired to your phone, simply double click the play button to start Siri or Google.

If you have not used Siri or Google on your phone before you may need to set it up.

To deactivate Siri/Google simply double click the play button again.

What is DUO Mode?

DUO mode allows you to connect two X0i speakers together for a wide stereo soundstage.

Duo mode only works when using Bluetooth as the source of the music.

How do I pair the X0i in DUO mode?

To connect two X0i together please follow these instructions:

  • Press and hold the power button on the two speakers to turn them on.
    Make sure they are not connected to any devices.
  • Choose one of the speakers as the master speaker.
    Press and hold the Bluetooth button for 3 seconds on the master speaker, until the speaker says "DUO mode pairing", then release the button.
  • Wait for 10 seconds, the two speakers will automatically connect to each other.
  • The master speaker will announce "DUO mode connected".
  • Now search for "BlueAnt X0i" on your phone to connect to the master speaker.

When in DUO mode:

  • the speaker volume is synchronized between the speakers.
  • either speaker can be used to control the music.
  • when you power off one speaker both will power off.
  • when powering speakers on, they power on independently.

How do I disconnect the X0i in DUO mode?

  • To disconnect two X0i in DUO mode press and hold the Bluetooth button on the master speaker for 3 seconds.
  • The speaker will announce "DUO mode disconnected".
  • The speakers will reconnect the next time they are both powered on.
  • To stop the speakers from reconnecting please use the DUO mode clearing procedure below.

How do I clear DUO mode on the X0i?

  • To clear DUO mode pairing, press and hold the Bluetooth mode button on the slave speaker, until the speaker says "DUO mode cleared".

    How many devices can the X0i connect to at the same time?

    The X0i connects to one source device at a time.

    How do I disconnect my X0i to change source device?

    Press and hold the Bluetooth button for about 1.5 seconds and the X0i will announce “disconnected”, then connect your other device.

    What is the IP rating of the X0i?

    The X0i is IP56, splashproof.

    How many drivers does the X0i have?

    The X0i has one driver and one passive radiator.

    How many Watts is the X0i?

    The X0i is 6 Watts.

    What Bluetooth version is the X0i?

    The X0i is Bluetooth version 5.0

    What is the range of the X0i?

    This depends on interference and the source device but it is possible to have up to a 30 metre range.

    Can I use my X0i with my computer or laptop?

    • To use the X0i via Bluetooth with your computer or laptop your computer must support A2DP for music playback.
    • To use the microphone on the speaker your computer must support HFP or HSP.
    • To check what is supported on your computer please check with your computer or laptop manufacturer.
    • Control of the music is done on your computer.
    • Volume on the speaker only controls the speaker and not the source volume.

    Do you need a driver to use the X0i on a computer?

    There is no driver required to use the X0i via Bluetooth on your computer.

    Can I an AUX cable with the X0i?

    • The X0i does not have an AUX input.